PMA4x4 4 Posted June 5, 2013 Long story short, the electrical rack is done. I just have to figure out where to put everything. 2 batteries 1 Air compressor 1 solenoid 1 breaker 2 Relay boxes 1 Fan controller 1 battery charger 1 washer fluid jug. Share this post Link to post Share on other sites
PMA4x4 4 Posted June 17, 2013 Been busy on some other projects lately so I have not had a chance to get to the Mule until today. I still have to spray some undercoating on the lower door jams but painting is DONE! Share this post Link to post Share on other sites
91AzXJ 2 Posted June 17, 2013 Lookin good. The dark bottom really breaks up the sea of blue. Share this post Link to post Share on other sites
PMA4x4 4 Posted June 17, 2013 Yeah that was the idea. Share this post Link to post Share on other sites
theksmith 3,667 Posted June 17, 2013 i think bringing the white roof color down to that body seam at the top of the windows would be cool too, then the blue would be like a long stripe and the white would go with the wheel color.... something to consider Share this post Link to post Share on other sites
PMA4x4 4 Posted June 17, 2013 Should be picking up the new body decals today. Share this post Link to post Share on other sites
PMA4x4 4 Posted August 19, 2013 I finally get a chance to build and KEEP my own actual bumper and I am already out of what I had ran off for production. It's a good thing! Share this post Link to post Share on other sites
alainsnyder 0 Posted August 19, 2013 I just read the entire thread. This thing is cool! Share this post Link to post Share on other sites
PMA4x4 4 Posted August 19, 2013 Bumper goes in for powder coating tomorrow! Share this post Link to post Share on other sites
PMA4x4 4 Posted August 22, 2013 Making the quick disconnects for the front winch. I am doing this for two reasons. 1) if I have to remove the bumper I dont have to fish the cables thru the grille. 2) I can quick disconnect the winch and plug in a set of jumper cables. Share this post Link to post Share on other sites
