theksmith 4,029 Posted September 12, 2015 nice - what kind of enclosure for the 10's? Share this post Link to post Share on other sites
DAvy120 1 Posted September 13, 2015 nice - what kind of enclosure for the 10's? Doing a seperate sealed angled box for each 10, was gonna put em in the back trunk space against the back seats. However now im not to sure since i wont be able to fit my spare in the back if i do (gonna be doing a setup similar to yours) may have to throw the tire on top and make a secondary tabletop. Idk future me's problem lol i miss my subs so thats priority right now. Also found the previous owner jacked the factory infinity amp so now to track down an amp and get to purchasing my door speakers. Share this post Link to post Share on other sites
DAvy120 1 Posted September 14, 2015 Heres what i got so far, got a nice surprise when i pulled the radio out to plug the audio cables in (a rats nest of cut and stripped wires just chillin). So i taped those all up and tucked em out of the way. Thinking about mounting the amp either to the side where the factory 6 disc changer set up was. We shall see Share this post Link to post Share on other sites
DAvy120 1 Posted September 18, 2015 Got a lil break from the new little one to mess around with the jeep some more. Finally relocated my cb into the center console Made a lil box for my amp since its too damn big to fit any other place and 99% of the time the only person that will sit in my back seat is my 3 year old. Share this post Link to post Share on other sites
DAvy120 1 Posted November 16, 2015 Little update. Picking up my rear bumper on friday should have it welded up, coated and installed by Christmas hopefully. Share this post Link to post Share on other sites
DAvy120 1 Posted November 23, 2015 Well picked up my rear bumper yesterday, started getting it welded up. Flatlands definetly needs to rethink their designs. We are having to do quite a few tweeks. But here's an in progress and mocked up. Should be fully welded up by Wednesday then coated and installed by end of the weekend. Share this post Link to post Share on other sites
DAvy120 1 Posted November 23, 2015 Not to mention these gaps on either side are kinda off putting. May work with my welder to see if he can cut some plate to cover up the gap here so it looks better. Share this post Link to post Share on other sites
DAvy120 1 Posted December 8, 2015 Got some led caged projector style pods for my fog lights. They have 3 modes, hi beam long throw, low beam with some spread and then 3 pulse flash. Modes are switched by turning them off and on again till you get the desired mode. I paid 25 bucks a piece for em. Hi beam Low beam Share this post Link to post Share on other sites
DAvy120 1 Posted December 20, 2015 Got some updates. Added leds to the interior and they are much brighter Installed leds in my headlights Got the rear bumper coated and installed Got some led cubes for my bday so had to order up some fender brackets Mounted 2 on the front bumper as well Ordered this bracket for the rear, it goes in the license plate spot Share this post Link to post Share on other sites
DAvy120 1 Posted December 20, 2015 Found a smoking deal on some 35x12.50x15 km2s so had to get em 15x8 series 51 steelies with a 3.75" backspacing Talk about tight clearances Share this post Link to post Share on other sites
