DAvy120 1 Posted January 22, 2016 sorry we didn't lose him, should have wrote that a little clearer. it was close tho he lost a lot of blood and is now in recovery doing well. doc said it will be a while before hes completely healed and back to his normal self. thank you tho! Share this post Link to post Share on other sites
DAvy120 1 Posted January 25, 2016 Tank tuck almost done. Here's what I have so far tho. Already tested the filler neck and it fills just fine. If ya don't like it drill through the unibody rails. I didn't have a hole saw big enough for it nor anymore money to get one. Have to cut the box template out of the steel I got and then seal that up, cut the carpet and it'll be good to go. Cut 5.5" out of the skid itself and then 4 5/8" out of the filler neck. This pic shows where I was unable to cut with the metal sheers so I just cut it with my Dremel tool took a while but didn't want to have sparks by the fuel tank lol Tank mounted back in the newly modified skid Hole cut for fuel lines Tank back in and checking clearance filler neck is slightly more bent than I would like but it fills just fine no splash back or overflow issues. lines installed Don't have a before but this is after gained a ton of clearance New plate floor (11ga steel) on and sealed with loctite weather proof that will stand up to 150° sealer I like overkill lol 16 rivots per side All painted Used a peach box as a template for my fuel like cover Piece of the filler neck I cut off. The fuel line box will eventually be covered with this so not worried about damaging it Share this post Link to post Share on other sites
DAvy120 1 Posted January 29, 2016 Tank tuck complete! Gonna try to get all the wiring done this weekend since has calmed down a bit. Also looking for new shocks and possibly getting new springs as well as isolators. Looking at the freedom offroad kit since it's on 300 bucks shipped with shocks and springs. Share this post Link to post Share on other sites
DAvy120 1 Posted February 16, 2016 Got my spod switches mounted up. Not my favorite but I can reach all the buttons comfortably. Also picked up the wood and hardware for my rear cargo area. Share this post Link to post Share on other sites
DAvy120 1 Posted February 17, 2016 Worked on installing the spod today. Found out my cables are about 4ft too short so I got in contact with them to see about an exchange/purchase longer ones. Anyways here the bracket I made up its kinda flex so I'd like to add some beefier bolts to it eventually. Of course when I decide to do my snorkel I'll be moving this setup somewhere else lol Share this post Link to post Share on other sites
DAvy120 1 Posted February 17, 2016 Wife got me some led license plate bulbs for valentine's day Also saw someone with a wk do this neat little mod so figured I'd give it a shot. Need to find a mic bracket and then should be good to go. Where I will want it And lazy temp lol Share this post Link to post Share on other sites
DAvy120 1 Posted February 20, 2016 Added a brace to the spod mount to help sturdy it up. Super strong now lol 4 down 2 to go and to drill a giant hole in my firewall.... Share this post Link to post Share on other sites
DAvy120 1 Posted February 20, 2016 Finally got all my stickers on Share this post Link to post Share on other sites
theksmith 4,150 Posted February 20, 2016 you're missing a sticker: http://offroadpassport.com/forum/showthread.php?t=209&highlight=round+decals Share this post Link to post Share on other sites
DAvy120 1 Posted February 21, 2016 you're missing a sticker: http://offroadpassport.com/forum/showthread.php?t=209&highlight=round+decals I know it's on the list of stickers to purchase Share this post Link to post Share on other sites
