Jump to content


Club Members
  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by Number7

  1. What Diane meant to say was the engine and starter turned over but did not start.
  2. Getting your diffs hung up was the problem. When some one got hung up they would just spin tires and make holes between the rocks making it even harder to find a line. Short wheel base and huge tires is the way to conquer this obstacle. I was the third Jeep on this rock garden so it was not too dug up, it took me a few attempts and then I found my line and crawled up without pulling cable.
  3. Cream Puff never pulled cable during the 3 days of wheeling.
  4. There's a 2 car attached and 2+ detached with bath room and small living quarters.
  5. I drained the diff oil and took the pan out in the sun and stirred the oil and saw lots of shiny glitter. The glitter makes me think the the damage might mean all bearings and possibly gears. I have decided to rent a U-haul trailer and take it to 4Wheel Parts in Mesa.
  6. I do want to tackle this but first I need to find out what backlash is and buy a diff bearing puller set.
  7. My 1992 XJ (Clifford) is making whining a noise from the rear diff area, that gets louder with speed. I put the Jeep on jack stands (after reassuring Diane that they weren't from Harbor Freight) and determined that the noise is coming from the pinion bearing. I'm planning to disassemble the diff, and replace the pinion bearings (and maybe the carrier bearings while I'm in there). My question is, if I put everything back together the way it is, and only replace the bearings, will it throw anything off? Like gear tolerances? What can go wrong? What should I be cautious of? I am no gear expert, I have never done this before. I am venturing into uncharted waters here!
  8. Hope you had a great B-day.
  9. @capsul We use Airbnb because it is cheaper then a hotel. Days Inn on Andy Divine is ok in a pinch: MAP
  10. Happy B-day you smokin hot chick.
  • Create New...