SinisterJK420

Ok so I had some time and mounted the push button to the new bezel, I trimmed some of the lighter mount to get the button as flush as I wanted without using the bulky rubber trim. I should get to the wiring this week. What size resistors did you get nad where did you end up putting the resistors and the relay to. I'm probaly go a make a harness with the wires so it's nice And clean

I got the EC02, same remotes that look like the mopar ones as I saw on both threads. I have the harnes and the EC02 waiting on the other items to come in. Hey if I'm leaving out the remote start would I have to wire in the resistors and the delay relay?

So i initially saw this post when "Ulyssefreak1"did on wrangler forum but after seeing the way you did it, clean and with the covers for the lock cyl I'm in for the project. I ordered everything but I can't find what you used for the ignition cover. Where did you get your cover? My JKU is 6sp so I don't think I'm gonna do the remote start for obvious reasons. Any suggestions or pointer I should be aware of? Thank you as well for putting the configurations that worked for you on the post. I think I'm a bit more confident in doing the install now than when I read the initial post.